Mitsubishi Electric · Hyper-Heat compatible

Mitsubishi Ceiling Cassette Indoor Units

Flush in the ceiling, air in four directions, nothing on the walls. The choice for kitchens, great rooms, and anyone who wants the comfort without seeing the equipment.

  • Mitsubishi Diamond Contractor ELITE
  • 12-year parts & labor warranty
  • 180-Day Comfort Guarantee
  • Veteran-owned since 2013
Ceiling cassette

The one your guests won't notice

A recessed ceiling cassette mounts between the joists with only a slim grille showing. Air leaves from four sides, so a single unit covers a large open kitchen or great room evenly with no hot corner and no cold one. The EZ FIT™ (MLZ) cassette is sized to drop between standard 16-inch joists — no soffit, no bulkhead — which is why it's the cassette we install most in Capital Region homes. The larger four-way SLZ cassette handles bigger rooms and light-commercial spaces.

Both pair with Hyper-Heat outdoor units for full heating at 5°F. The optional 3D i-see® sensor maps the room and directs airflow to where people are — or away from them.

Mitsubishi recessed ceiling cassette in an open kitchen

Specifications that matter

SeriesMLZ-KP EZ FIT™ (one-way, fits between joists); SLZ-KF (four-way)
Capacities9,000 – 18,000 BTU/h per unit
Grille sizeMLZ: fits 16 in joist bay; SLZ: 22.5 in square
AirflowMLZ: one-way; SLZ: four-way with individual vane control
Heating100% capacity at 5°F, operates to -13°F (H2i®)
Options3D i-see® sensor, built-in condensate lift pump
WarrantyMitsubishi extended warranty registered at commissioning; 12-yr parts & labor with Elite Care Plan

Exact model, capacity and efficiency ratings are selected per zone at your free estimate. Figures shown are typical for current Mitsubishi Electric residential lines.

Best for

  • Kitchens and open great rooms
  • Homes where wall units aren't wanted for looks
  • Rooms with an attic or ceiling cavity above
  • Offices, waiting rooms and light-commercial spaces

Questions about ceiling cassette units

Do I need attic access above the room?

For the EZ FIT™ cassette, a joist bay with about 8 inches of depth and access from above or through the ceiling opening is enough. The four-way SLZ needs a bit more depth. We check at the estimate.

What does it look like from below?

A white grille roughly the size of a large ceiling light fixture, flush with the drywall. Most people stop noticing it within a week.

Where does the water go?

Cassettes have a built-in condensate pump that lifts the water to a drain line in the ceiling cavity, routed outside with the line set.

Can it heat as well as cool?

Yes. Because it's in the ceiling, the vanes angle the warm air downward in heating mode; the i-see® sensor helps direct it to the occupied side of the room.

Is it louder than a wall unit?

Slightly, because the fan is above your head — but still whisper-quiet (around 25 dB on low). It's the fan you hear, not a compressor.

Can I put one in a bathroom?

Not recommended — humidity and clearance. A wall unit in the adjacent hall or bedroom usually covers it.

NYS Clean Heat · Efficiency Vermont

Rebates: $6,000–$10,000

New York homeowners switching from oil, propane or electric baseboard to a Mitsubishi cold-climate heat pump qualify for NYS Clean Heat utility rebates through National Grid or NYSEG — the highest tier goes to whole-home conversions. Vermont homes get a set per-unit amount through Efficiency Vermont plus utility bonuses. We confirm your exact number at the free estimate and submit every application for you.

See what you qualify for
Free in-home estimate

Get an exact price for your home

Takes 30 seconds. We reach out within one business day, visit your home, size the system properly, and hand you a written price with every rebate already applied. No pressure, no obligation.

  • $6,000–$10,000 in NY rebates — we file the paperwork
  • 18 months, 0% interest financing available
  • 12-year parts & labor warranty with our Elite Care Plan
  • 180-Day Comfort Guarantee on qualifying installs

Prefer to talk? Call or text (518) 719-5614

Ready for one system that heats and cools — with no ductwork?

Free estimate, rebates filed for you, installed in days. Talk to a Mitsubishi Diamond Contractor ELITE.

Call (518) 719-5614 Free Estimate