Home Maintenance Pricing

Superior Co-Op Maintenance Pricing

shutterstock 132126779

Superior CO-OP

Maintenance Pricing

 

Maintenance Pricing Details and Services

Maintenance Pricing

Oil

Natural / Propane

  • Ductless Indoor Units +$60.00 each
    Schedule

    Air Conditioner Maintenance $169.00

    • Inspect, clean and service A/C Condenser (level condenser on the pad if necessary/possible), all high and low voltage wiring, inspect contact, capacitor, compressor, condenser oil, fan blade, fan motor, the refrigerant charge (addition of refrigerant is extra)
    • Inspect line set insulation (extra charge if needs to be replaced), disconnect box, indoor coil, condensate trap, condensate line, condensate pump, thermostat (battery replacement is extra) and furnace filter (replacement if the customer provided or this is an extra charge).
      Schedule

      Gas/Propane Water Heater Maintenance $109.00

      • Inspect water heater for leakage, condition, gas valve, CO test
      • Drain water from the bottom of a water heater until it is clear
      • Replace thermocouple and check for gas leaks
        Schedule

        Oil Water Heater Maintenance $129.00

        • Inspect, clean and service water heater
        • Drain water from the bottom of the water heater until it is clear
        • Check for tank leakage, replace the nozzle, replace oil filter (spin on filter cartridge extra), all high and low voltage wiring
        • Inspect contact, burner relay, burner motor, coupler, fuel pump pressure, relays, ball valves, gate valves, vent pipe, supply and return piping
        • Brush and clean boiler flue and vent pipe to chimney and combustion test
          Schedule

          Dryer Vent Maintenance $99.00

          • Inspect, service and clean dryer vent.
          • Inspect for broken or split vent and vented to outside.
          • Remove outdoor vent cover and brush lint out.
          • Remove dryer vent from the dryer and brush lint out.
          • Vacuum out vent connection on the dryer.
          • Tape dryer vent if possible and repair. Replacement is an additional charge.
            Schedule

            Oil Boiler Maintenance $229.00

            • Inspect, clean and service oil boiler, burner box.
            • Replace nozzle, oil filter, all high and low voltage wiring.
            • Inspect contact, burner relay, burner motor, coupler, fuel pump pressure, relays, zone valve, circulators, expansion tank, auto feed, pressure relief valve, air vent, aqua-stat, check valve, ball valves, gate valves, vent pipe, supply and return piping, low motor cutoff.
            • Brush and clean boiler flue and vent pipe to chimney, thermostat and combustion test.
              Schedule

              Oil Furnace Maintenance $189.00

              • Inspect, clean and service oil furnace blower assembly, squirrel fan, fan motor, and capacitor.
              • Check and adjust the tension on belt and oil motor.
              • Replace nozzle, and oil filter (spin on filter cartridge extra), all high and low voltage wiring.
              • Inspect contact, burner relay, burner motor, coupler, fuel pump pressure, electrodes, vent pipe, supply and return plenums.
              • Brush and clean furnace flue and vent pipe to chimney.
              • Replace furnace filter (customer to provide or replacement is extra).
              • Thermostat and combustion test.
              Schedule

              Gas Boiler Maintenance $179.00

              • Inspect, clean and service natural gas or propane boiler, burner box, all high and low voltage wiring.
              • Inspect contact, relays, zone valve, circulators (lube if needed), expansion tank, auto feed, pressure relief valve, air vent, aqua-stat, check valve, ball valve, gate valves, vent pipe, supply and return piping, low water cutoff, condensate trap, condensate line, condensate pump, thermostat (battery replacement is extra) and combustion test.
                Schedule

                Ductless Mini-Split Maintenance (Condensing Unit) $169.00

                • Inspect, clean and service Mini Split Condenser (level condenser on the pad if necessary and possible), all high and low voltage wiring
                • Inspect contact, capacitor, compressor, condenser coil, fan blade, fan motor, the refrigerant charge (addition of refrigerant is additional)
                • Inspect line set, line set insulation (extra charge if this needs to be replaced)and disconnect box.  All indoor fan coil servicing and cleaning are $69.00 each.
                Schedule

                Gas Furnace Maintenance $169.00

                • Inspect, clean and service natural gas/propane furnace, furnace blower assembly, squirrel fan, fan motor, capacitor
                • Check and adjust the tension on the belt
                • Lube motor
                • All high and low voltage wiring
                • Inspect contact, burner relay, vent pipe, supply and return plenums.
                • Brush and clean furnace flue and vent pipe to chimney.
                • Replace furnace filter (customer to provide or replacement is extra).
                • Inspect thermostat (battery replacement is extra) and combustion test
                Schedule

                7 Things Involved in Air Conditioner Maintenance?

                Air conditioner maintenance refers to the regular upkeep and cleaning of your air conditioning system to ensure that it is functioning properly and efficiently. This maintenance can help prevent breakdowns, extend the lifespan of your system, and improve its performance and energy efficiency.

                Some common tasks involved in air conditioner maintenance include:

                1. Cleaning the air filter: This is a simple task that can be done by the homeowner and involves removing the air filter and cleaning or replacing it as needed. A dirty air filter can restrict airflow and reduce the efficiency of your system.
                2. Checking the refrigerant levels: A professional HVAC technician should perform this task to make sure that your system has the proper refrigerant levels for efficient operation.
                3. Checking the electrical connections: A professional HVAC technician should check all electrical connections to ensure that they are tight and free from corrosion.
                4. Cleaning the condenser coils: The condenser coils should be cleaned regularly to remove dirt, dust, and other debris that can reduce the efficiency of your system.
                5. Checking the ductwork: The ductwork should be inspected for leaks, cracks, and other damage that can affect the efficiency of your system.
                6. Lubricating the moving parts: Moving parts, such as the fan motor, should be lubricated to ensure smooth operation and prevent wear and tear.
                7. Testing the system: A professional HVAC technician should perform a full test of your system to ensure that it is functioning properly and efficiently.

                It is recommended to have professional air conditioner maintenance performed once a year, typically in the spring before the start of the cooling season. This will help ensure that your system is ready to operate efficiently and effectively when you need it most.

                6 Common Tasks Involved in Gas Water Heater Maintenance

                Gas or propane water heater maintenance is the regular upkeep and cleaning of your gas water heater to ensure that it is functioning properly and efficiently. This maintenance can help prevent breakdowns, extend the lifespan of your system, and improve its performance and energy efficiency.

                Some common tasks involved in gas water heater maintenance include:

                1. Flushing the tank: Over time, sediment can build up in the bottom of the tank, reducing the efficiency of your water heater and affecting its performance. Flushing the tank removes this sediment, which can improve the performance of your system.
                2. Checking the temperature and pressure relief valve: This valve is a safety feature that helps prevent the tank from overheating or over-pressurizing. A professional plumber should check this valve to ensure that it is functioning properly.
                3. Checking the combustion chamber: The combustion chamber should be inspected for rust, corrosion, and other signs of damage that can affect the performance of your system.
                4. Cleaning the flue: The flue is the pipe that carries waste gases from the combustion chamber to the outside of your home. It should be inspected and cleaned regularly to ensure that it is free from obstructions and functioning properly.
                5. Checking the gas connections: The gas connections should be inspected for leaks, cracks, and other signs of damage. A professional plumber should check these connections to ensure that they are tight and secure.
                6. Testing the system: A professional plumber should perform a full test of your system to ensure that it is functioning properly and efficiently.

                It is recommended to have professional gas water heater maintenance performed once a year, or as needed, to ensure that your system is functioning properly and efficiently. This maintenance can help prevent breakdowns, extend the lifespan of your system, and improve its performance and energy efficiency.

                5 Common Tasks Involved in Oil Water Heater Maintenance

                Oil water heater maintenance is the regular upkeep and cleaning of your oil-fired water heater to ensure that it is functioning properly and efficiently. This maintenance can help prevent breakdowns, extend the lifespan of your system, and improve its performance and energy efficiency.

                Some common tasks involved in oil water heater maintenance include:

                1. Checking the oil filter: This filter removes impurities from the oil, which can clog the nozzle and affect the performance of your water heater. A professional plumber should check the oil filter and replace it as needed.
                2. Checking the combustion chamber: The combustion chamber should be inspected for rust, corrosion, and other signs of damage that can affect the performance of your system.
                3. Checking the flue: The flue is the pipe that carries waste gases from the combustion chamber to the outside of your home. It should be inspected and cleaned regularly to ensure that it is free from obstructions and functioning properly.
                4. Checking the oil connections: The oil connections should be inspected for leaks, cracks, and other signs of damage. A professional plumber should check these connections to ensure that they are tight and secure.
                5. Testing the system: A professional plumber should perform a full test of your system to ensure that it is functioning properly and efficiently.

                It is recommended to have professional oil water heater maintenance performed once a year, or as needed, to ensure that your system is functioning properly and efficiently. This maintenance can help prevent breakdowns, extend the lifespan of your system, and improve its performance and energy efficiency.

                5 Common Tasks Involved in Ductless Mini-Split Maintenance

                Ductless mini-split maintenance is the regular upkeep and cleaning of your ductless mini-split heating and cooling system to ensure that it is functioning properly and efficiently. This maintenance can help prevent breakdowns, extend the lifespan of your system, and improve its performance and energy efficiency.

                Some common tasks involved in ductless mini-split maintenance include:

                1. Cleaning the air filters: The air filters in your ductless mini-split system should be cleaned or replaced regularly to ensure that they are functioning properly and not affecting the performance of your system.
                2. Inspecting the indoor and outdoor units: Both the indoor and outdoor units should be inspected for signs of damage, wear and tear, and other issues that can affect the performance of your system.
                3. Checking the refrigerant levels: The refrigerant levels in your system should be checked to ensure that they are at the proper levels, as low refrigerant levels can affect the performance and efficiency of your system.
                4. Inspecting the drain line: The drain line should be inspected to ensure that it is functioning properly and not clogged, which can cause water damage and other problems.
                5. Testing the system: A professional HVAC technician should perform a full test of your system to ensure that it is functioning properly and efficiently.

                It is recommended to have professional ductless mini-split maintenance performed once a year, or as needed, to ensure that your system is functioning properly and efficiently. This maintenance can help prevent breakdowns, extend the lifespan of your system, and improve its performance and energy efficiency.